Distribution and wholesale of Shanghai Zhabei District Samsung sewage pump
Shanghai Zhabei District type pipeline type non-clogging sewage pump product introduction:
Type non-clogging submersible sewage pump is based on the introduction of foreign advanced technology, combined with the use of domestic water pumps The new generation of pump products successfully developed based on the characteristics of the pump has the characteristics of significant energy saving effect, anti-winding, no clogging, automatic installation and automatic control. It has a unique effect in discharging solid particles and long fiber waste.
Product Overview of Shanghai Zhabei District Pipeline High-efficiency Non-clogging Sewage Pump
Shanghai Zhabei District Pipeline High-efficiency Non-clogging Sewage Pump is a vertical single-suction single-stage centrifugal drainage pump. The center lines of the inlet and outlet are on the same horizontal line. The inlet and outlet flanges are the same, so it is very convenient to install and disassemble. It occupies a small area and can be installed at any position in the pipeline like a valve. The pump and motor are directly connected coaxially. It is an electromechanical integration product with compact structure and stable performance. The design of large flow channel anti-clogging hydraulic components greatly improves the dirt passing capacity and can effectively pass through fibrous substances twice the diameter of the pump and solid particles with a diameter of about 10 times the diameter of the pump. The design is reasonable, the matching motor is reasonable, the efficiency is high, and the energy saving effect is significant.
Structural description of high-efficiency pipeline-type non-clogging sewage pump in Zhabei District, Shanghai
Type series non-clogging single-stage pipeline sewage pump has the inlet and outlet at the same level and the same specifications. It has a vertical structure and a small footprint. The motor and the pump are coaxial and equipped with a mounting chassis for easy and stable installation. The impeller adopts a single (double) flow channel and has good passing performance.
The Shanghai Zhabei District pipeline-type high-efficiency non-clogging sewage pump adopts a unique impeller structure and a new type of mechanical seal, which can effectively transport solid materials and long fibers. Compared with the traditional impeller, the impeller of this pump adopts the form of single flow channel or double flow channel. It is similar to an elbow with the same cross-section size. It has very good flow performance and is equipped with a reasonable volute, making the pump highly efficient. The impeller and impeller have undergone dynamic and static balance tests to ensure that the pump does not vibrate during operation.
Product features of the pipeline-type high-efficiency non-clogging sewage pump in Zhabei District, Shanghai:
. The pump is a vertical single-suction single-stage centrifugal sewage pump. The center lines of the inlet and outlet are on the same horizontal line, and the inlet and outlet flanges are the same. Therefore, installation and disassembly are very convenient. It occupies a small area and can be installed at any position in the pipeline like a valve. .
． The pump and motor are directly connected coaxially. It is an electromechanical integration product with compact structure and stable performance.
3. The design of large-flow anti-clogging hydraulic components greatly improves the dirt passing capacity and can effectively pass through fibrous substances with twice the diameter of the pump and solid particles with a saliva diameter of about 10 times the diameter of the pump.
． The design is reasonable, the matching motor is reasonable, the efficiency is high, and the energy saving effect is significant.
． The mechanical seal is made of hard wear-resistant tungsten carbide, which is durable and wear-resistant, allowing the pump to operate safely and continuously for more than hours.
． It has advanced hydraulic performance, high overall machine efficiency and low operating noise.
． By adding a protective cover to the blade end of the motor, the whole machine can be placed outdoors without the need for a machine room, which can save a lot of infrastructure costs.
． Use it within the operating lift range to ensure that the motor is not overloaded.
Shanghai Zhabei District pipeline-type high-efficiency non-clogging sewage pump product usage:
This type of pipeline-type non-clogging sewage pump is suitable for the discharge of severely polluted wastewater from factories and businesses, sewage discharge stations in residential areas, and drainage from urban sewage treatment plants. Systems, civil air defense system drainage stations, water supply equipment in water plants, sewage discharge in hospitals and hotels, municipal engineering construction sites, exploration, mining supporting auxiliary machinery, rural biogas pools, farmland irrigation and other industries, conveyor belt granular sewage and dirt, It can also be used in clean water and weakly corrosive media.
Installation and use of pipeline-type high-efficiency non-clog sewage pump in Zhabei District, Shanghai:
First check whether the external fasteners have become loose during transportation.
.Check whether the power supply voltage meets the requirements on the motor nameplate.
3. Turn on the power and do a test run to see if the impeller rotates in the direction indicated on the pump. If the direction is reversed, just swap any two-phase wires in the cable. The test run should not take too long. To avoid burning the seal.
.Install the pump and start it up. It is best to install the pump foot screws.
Inspection and maintenance of pipeline-type high-efficiency non-blocking sewage pumps in Zhabei District, Shanghai:
Before using the pump, the insulation resistance of the motor windings to the casing should be checked. If it is lower than . megohm, the stator must be dried Dry until the insulation resistance rises before use.
.If the gap between the impeller and the oil seal at the inlet of the pump body exceeds the wear-resistant oil seal, the wear-resistant oil seal should be replaced.
3. When the pump seal leaks, the seal should be replaced in time. When replacing, first install the static seal flat and solid, and then install the dynamic seal on the shaft.
When replacing the impeller, use a tensioner to pull it out, and do not hit it with a hammer to avoid damaging the axis.
Common causes of failure of pipeline-type high-efficiency non-clogging sewage pumps in Zhabei District, Shanghai:
No water is discharged, the weight and particle size of the pumped liquid are too high, the liquid flow channel is blocked, the impeller is turned in the wrong direction, the bar material is pumped into the impeller and is stuck at the pipe outlet The height exceeds the rated lift height.
.Insufficient flow and low lift. The voltage is low, the impeller turns in the wrong direction or the wear-resistant seal is worn. The liquid is too heavy and granular.
The products have obtained various professional certification certificates and customer recognition for their superior performance and excellent quality. Technology is the primary productive force. Continuous technological innovation is the cornerstone of Samsung's progress. Absorbing and digesting outstanding scientific and technological achievements at home and abroad is the key to our success.
Distribution and wholesale of Samsung sewage pumps in Zhabei District, Shanghai